Security and Roles v3.7.26

The BDR3 extension can be created only by superusers, although if desired, it is possible to set up the pgextwlist extension and configure it to allow BDR3 to be created by a non-superuser.

Configuring and managing BDR3 does not require superuser access, nor is that recommended. The privileges required by BDR3 are split across the following default/predefined roles, named similarly to the PostgreSQL default/predefined roles:

• bdr_superuser - the highest-privileged role, having access to all BDR tables and functions.
• bdr_read_all_stats - the role having read-only access to the tables, views and functions, sufficient to understand the state of BDR.
• bdr_monitor - at the moment the same as bdr_read_all_stats, to be extended later.
• bdr_application - the minimal privileges required by applications running BDR.
• bdr_read_all_conflicts - can view all conflicts in bdr.conflict_history.

These BDR roles are created when the BDR3 extension is installed. See [BDR Default Roles] below for more details.

Managing BDR does not require that administrators have access to user data.

Arrangements for securing conflicts are discussed here Logging Conflicts to a Table.

Conflicts may be monitored using the BDR.conflict_history_summary view.

Catalog Tables

System catalog and Information Schema tables are always excluded from replication by BDR.

In addition, tables owned by extensions are excluded from replication.

BDR Functions & Operators

All BDR functions are exposed in the bdr schema. Any calls to these functions should be schema qualified, rather than putting bdr in the search_path.

All BDR operators are available via pg_catalog schema to allow users to exclude the public schema from the search_path without problems.

Granting privileges on catalog objects

Administrators should not grant explicit privileges on catalog objects such as tables, views and functions; manage access to those objects by granting one of the roles documented in [BDR Default Roles].

This requirement is a consequence of the flexibility that allows joining a node group even if the nodes on either side of the join do not have the exact same version of BDR (and therefore of the BDR catalog).

More precisely, if privileges on individual catalog objects have been explicitly granted, then the bdr.join_node_group() procedure could fail because the corresponding GRANT statements extracted from the node being joined might not apply to the node that is joining.

Role Management

Users are global objects in a PostgreSQL instance. CREATE USER and CREATE ROLE commands are replicated automatically if they are executed in the database where BDR is running and the bdr.role_replication is turned on. However, if these commands are executed in other databases in the same PostgreSQL instance then they will not be replicated, even if those users have rights on the BDR database.

When a new BDR node joins the BDR group, existing users are not automatically copied unless the node is added using bdr_init_physical. This is intentional and is an important security feature. PostgreSQL allows users to access multiple databases, with the default being to access any database. BDR does not know which users access which database and so cannot safely decide which users to copy across to the new node.

PostgreSQL allows you to dump all users with the command:

pg_dumpall --roles-only > roles.sql

The file roles.sql can then be edited to remove unwanted users before re-executing that on the newly created node. Other mechanisms are possible, depending on your identity and access management solution (IAM), but are not automated at this time.

Roles and Replication

DDL changes executed by a user are applied as that same user on each node.

DML changes to tables are replicated as the table-owning user on the target node. It is recommended - but not enforced - that a table is owned by the same user on each node.

If table A is owned by user X on node1 and owned by user Y on node2, then if user Y has higher privileges than user X, this could be viewed as a privilege escalation. Since some nodes have different use cases, we allow this but warn against it to allow the security administrator to plan and audit this situation.

On tables with row level security policies enabled, changes will be replicated without re-enforcing policies on apply. This is equivalent to the changes being applied as NO FORCE ROW LEVEL SECURITY, even if FORCE ROW LEVEL SECURITY is specified. If this is not desirable, specify a row_filter that avoids replicating all rows. It is recommended - but not enforced - that the row security policies on all nodes be identical or at least compatible.

Note that bdr_superuser controls replication for BDR and may add/remove any table from any replication set. bdr_superuser does not need, nor is it recommended to have, any privileges over individual tables. If the need exists to restrict access to replication set functions, restricted versions of these functions can be implemented as SECURITY DEFINER functions and GRANTed to the appropriate users.

Connection Role

When allocating a new BDR node, the user supplied in the DSN for the local_dsn argument of bdr.create_node and the join_target_dsn of bdr.join_node_group are used frequently to refer to, create, and manage database objects. This is especially relevant during the initial bootstrapping process, where the specified accounts may invoke operations on database objects directly or through the pglogical module rather than BDR.

BDR is carefully written to prevent privilege escalation attacks even when using a role with SUPERUSER rights in these DSNs.

To further reduce the attack surface, a more restricted user may be specified in the above DSNs. At a minimum, such a user must be granted permissions on all nodes, such that following stipulations are satisfied:

• the user has the REPLICATION attribute
• it is granted the CREATE permission on the database
• it inherits the pglogical_superuser and bdr_superuser roles
• it owns all database objects to replicate, either directly or via permissions from the owner role(s).

Once all nodes are joined, the permissions may be further reduced to just the following to still allow DML and DDL replication:

• The user has the REPLICATION attribute.
• It inherits the pglogical_superuser and bdr_superuser roles.

Privilege Restrictions

BDR enforces additional restrictions, effectively preventing the use of DDL that relies solely on TRIGGER or REFERENCES privileges. The following sub-sections explain these.

GRANT ALL will still grant both TRIGGER and REFERENCES privileges, so it is recommended that you state privileges explicitly, e.g. GRANT SELECT, INSERT, UPDATE, DELETE, TRUNCATE instead of ALL.

Foreign Key Privileges

ALTER TABLE ... ADD FOREIGN KEY is only supported if the user has SELECT privilege on the referenced table, or if the referenced table has RLS restrictions enabled which the current user cannot bypass.

Thus, the REFERENCES privilege is not sufficient to allow creation of a Foreign Key with BDR. Relying solely on the REFERENCES privilege is not typically useful since it makes the validation check execute using triggers rather than a table scan, so is typically too expensive to used successfully.

Triggers

In PostgreSQL, triggers may be created by both the owner of a table and anyone who has been granted the TRIGGER privilege. Triggers granted by the non-table owner would execute as the table owner in BDR, which could cause a security issue. The TRIGGER privilege is seldom used and PostgreSQL Core Team has said "The separate TRIGGER permission is something we consider obsolescent."

BDR mitigates this problem by using stricter rules on who can create a trigger on a table:

• superuser
• bdr_superuser
• Owner of the table can create triggers according to same rules as in PostgreSQL (must have EXECUTE privilege on function used by the trigger).
• Users who have TRIGGER privilege on the table can only create a trigger if they create the trigger using a function that is owned by the same owner as the table and they satisfy standard PostgreSQL rules (again must have EXECUTE privilege on the function). So if both table and function have same owner and the owner decided to give a user both TRIGGER privilege on the table and EXECUTE privilege on the function, it is assumed that it is okay for that user to create a trigger on that table using this function.
• Users who have TRIGGER privilege on the table can create triggers using functions that are defined with the SECURITY DEFINER clause if they have EXECUTE privilege on them. This clause makes the function always execute in the context of the owner of the function itself both in standard PostgreSQL and BDR.

The above logic is built on the fact that in PostgreSQL, the owner of the trigger is not the user who created it but the owner of the function used by that trigger.

The same rules apply to existing tables, and if the existing table has triggers which are not owned by the owner of the table and do not use SECURITY DEFINER functions, it will not be possible to add it to a replication set.

These checks were added with BDR 3.6.19. An application that relies on the behavior of previous versions can set bdr.backwards_compatibility to 30618 (or lower) to behave like earlier versions.

BDR replication apply uses the system-level default search_path only. Replica triggers, stream triggers and index expression functions may assume other search_path settings which will then fail when they execute on apply. To ensure this does not occur, resolve object references clearly using either the default search_path only (always use fully qualified references to objects, e.g. schema.objectname), or set the search path for a function using ALTER FUNCTION ... SET search_path = ... for the functions affected.

BDR Default/Predefined Roles

BDR predefined roles are created when the BDR3 extension is installed. Note that after BDR3 extension is dropped from a database, the roles continue to exist and need to be dropped manually if required. This allows BDR to be used in multiple databases on the same PostgreSQL instance without problem.

Remember that the GRANT ROLE DDL statement does not participate in BDR replication, thus you should execute this on each node of a cluster.

bdr_superuser

• ALL PRIVILEGES ON ALL TABLES IN SCHEMA BDR
• ALL PRIVILEGES ON ALL ROUTINES IN SCHEMA BDR

bdr_read_all_stats

SELECT privilege on

• bdr.conflict_history_summary
• bdr.ddl_epoch
• bdr.ddl_replication
• bdr.global_consensus_journal_details
• bdr.global_lock
• bdr.global_locks
• bdr.local_consensus_state
• bdr.local_node_summary
• bdr.node
• bdr.node_catchup_info
• bdr.node_conflict_resolvers
• bdr.node_group
• bdr.node_local_info
• bdr.node_peer_progress
• bdr.node_slots
• bdr.node_summary
• bdr.replication_sets
• bdr.sequences
• bdr.state_journal_details
• bdr.stat_relation
• bdr.stat_subscription
• bdr.subscription
• bdr.subscription_summary
• bdr.tables
• bdr.worker_errors

EXECUTE privilege on

• bdr.bdr_edition
• bdr.bdr_version
• bdr.bdr_version_num
• bdr.decode_message_payload
• bdr.get_global_locks
• bdr.get_raft_status
• bdr.get_relation_stats
• bdr.get_slot_flush_timestamp
• bdr.get_sub_progress_timestamp
• bdr.get_subscription_stats
• bdr.peer_state_name
• bdr.show_subscription_status

bdr_monitor

All privileges from bdr_read_all_stats, plus

EXECUTE privilege on

• bdr.monitor_group_versions
• bdr.monitor_group_raft
• bdr.monitor_local_replslots

bdr_application

EXECUTE privilege on

• All functions for column_timestamps datatypes
• All functions for CRDT datatypes
• bdr.alter_sequence_set_kind
• bdr.create_conflict_trigger
• bdr.create_transform_trigger
• bdr.drop_trigger
• bdr.get_configured_camo_partner_of
• bdr.get_configured_camo_origin_for
• bdr.global_lock_table
• bdr.is_camo_partner_connected
• bdr.is_camo_partner_ready
• bdr.logical_transaction_status
• bdr.ri_fkey_trigger
• bdr.seq_nextval
• bdr.seq_currval
• bdr.seq_lastval
• bdr.trigger_get_committs
• bdr.trigger_get_conflict_type
• bdr.trigger_get_origin_node_id
• bdr.trigger_get_row
• bdr.trigger_get_type
• bdr.trigger_get_xid
• bdr.wait_for_camo_partner_queue
• bdr.wait_slot_confirm_lsn

Note that many of the above functions have additional privileges required before they can be used, for example, you must be the table owner to successfully execute bdr.alter_sequence_set_kind. These additional rules are documented with each specific function.

bdr_read_all_conflicts

BDR logs conflicts into the bdr.conflict_history table. Conflicts are visible to table owners (only), so no extra privileges are required to read the conflict history. If it is useful to have a user that can see conflicts for all tables, you may optionally grant the role bdr_read_all_conflicts to that user.